<<Back to Kokopelli Technologies>>
Model 20 Microscope
Compare w/Model 5 | Compare w/Model 10
This is an exceptional microscope. Excellent quality optics make this microscope easy on the eyes. The Model 20 sets a new standard of precision optics, highly engineered mechanics, and very rugged construction, all at little more cost than a budget microscope. Objective turret (nosepiece) is in reverse position to permit easier changing and positioning of specimen slides. The cool, 5-watt fluorescent illumination system provides optimum image brightness, virtually no bulb heat, and has a 10,000-hour rated bulb life.
Optical System
- Widefield 10x eyepiece with revolving pointer.
- 45° inclined viewing head rotates 360° for easy sharing by more than one viewer or for reverse position viewing.
- 40x, 100x and 400x magnification.
- DIN standard 4x (0.10 N.A.), 10x (0.25 N.A.) and 40xR (0.65 N.A.) objectives. All are achromatic, parfocalled, parcentered, and color-coded.
- 3-hole objective turret, reverse position, ball-bearing mounted for smooth, precise changes in magnification.
Illumination
- Built-in 5-watt fluorescent illumination, delivers greater light and longer life than standard 20-watt tungsten bulb. Virtually no base heat. 10,000 hour rated bulb.
- Base mounted on/off switch, heavy-duty 3-wire grounded electrical system and plug.
- 0.5A time delay fuse.
Focusing
- Separate low position coarse and fine focusing controls.
- Stage moves up or down, eyepiece and body remain fixed.
- Slip clutch prevents damage to focusing system.
- Easy to use, knurled knob, tension adjustment eliminates stage drift.
- Safety rack stop prevents damage to slides and objective lenses.
Stage
- Large 120mm x 125mm (4-3/4 in. x 5 in.) stage, with locked-on spring mounted stage clips, drilled and tapped to accept optional mechanical stage.
- Built-in 0.65NA condenser lens.
- Calibrated 5-hole disc diaphragm.
Frame
- Rugged cast metal, gray enamel finish.
- Height 380mm (15 in).
- Net wt. 4 kgs (9 lbs).
Compare w/Model 5 | Compare w/Model 10
Lifetime Limited Warranty
The Model 20 Microscope is guaranteed to be free from defects in material and workmanship under normal use and service for the life of the instrument. The warranty does not cover damage resulting from abuse or misuse, repairs or alterations performed by other than authorized repair technicians, or damage occurring in transit. The warranty does not cover bulbs, power supplies, fuses, cords, or add-on accessories such as mechanical specimen holders that are not built into the microscope stage as an integral part of original manufacture. Warranty does not cover lenses that have become inoperable due to excessive dirtiness as a result of misuse or lack of normal maintenance.
Any cameras and software supplied with this microscope are warranted from date of purchase as follows: Cameras, 1-year limited warranty. Software, 90-day limited warranty.
Other than set forth above, Kokopelli Technologies, LLC hereby disclaims all warranties, express or implied.
While it is not necessary to register your purchase of a microscope, any camera or software must be registered by completing and mailing the warranty registration card enclosed with such product.
For warranty service, instrument should be well packed to avoid damage in transit, accompanied by a description of the difficulty and return instructions, and shipped postage prepaid to Kokopelli Technologies, LLC at the address below. Kokopelli Technologies, LLC will repair or replace at no charge and return postage prepaid. For customers living outside the United States, Kokopelli Technologies, LLC will provide standard warranty service. However, inbound & outbound shipping cost is the responsibility of the consumer. If failure was caused by misuse, alterations, accident or abnormal conditions of operation, an estimate for repairs will be submitted for approval prior to work being performed.
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. If you have questions concerning this product or warranty, contact:
Kokopelli Technologies, LLC
209 County Road 113
Santa Fe, NM 87506
customerservice@fertilityformen.com
505-455-7364